FH02GJ-380/480
Product Introduction
| Ceramic Cartridge Model no. FH02GJ-380/480 |
| Technical characteristics of the ceramic discs | |||
|---|---|---|---|
| Material | AL2O3 92%~96% | ||
| Surface roughness | Ra 0.1 ~ Ra 0.3 μm | ||
| Hardness | ＞1000 HV | ||
| Flatness | ＜0.6 μm | ||
| Technical characteristics of the cartridge | |||
| 1st step opening angle / Max. opening angle | 10° / 24.5° | ||
| Max. rotary angle | 90° | ||
| Recommended nut tightening torque | 8~10 N.m | ||
| Water resistance pressure | 350~500 psi | ||
| Max. temperature | 90℃(194℉) | ||
| Endurance test | 500,000 cycles (ASME A112.18.1) 70,000cycles (EN817) |
||
| Flow rate-1st step opening angle (10°) | |||
| Water pressure |
Hot water (L/min) |
Cold water (L/min) |
Mixing (L/min) |
| 1 bar | 6.30 | 6.50 | 4.50 |
| 2 bar | 8.40 | 9.10 | 6.20 |
| 3 bar | 10.50 | 10.90 | 7.50 |
| Flow rate-Max. opening angle (24.5°) | |||
| Water pressure |
Hot water (L/min) |
Cold water (L/min) |
Mixing (L/min) |
| 1 bar | 10.00 | 10.50 | 12.10 |
| 2 bar | 14.00 | 14.70 | 16.70 |
| 3 bar | 16.80 | 17.80 | 20.20 |
