DL02GJ-380/480
Product Introduction
| Ceramic Cartridge Model no. DL02GJ-380/480 |
| Technical characteristics of the ceramic discs | |||
|---|---|---|---|
| Material | AL2O3 92%~96% | ||
| Surface roughness | Ra 0.1 ~ Ra 0.3 μm | ||
| Hardness | ＞1000 HV | ||
| Flatness | ＜0.6 μm | ||
| Technical characteristics of the cartridge | |||
| 1st step opening angle / Max. opening angle | 10° / 24.5° | ||
| Max. rotary angle | 90° | ||
| Recommended nut tightening torque | 10~12 N.m | ||
| Water resistance pressure | 350~500 psi | ||
| Max. temperature | 90℃(194℉) | ||
| Endurance test | 500,000 cycles (ASME A112.18.1) 70,000cycles (EN817) |
||
| Flow rate-1st step opening angle (10°) | |||
| Water pressure |
Hot water (L/min) |
Cold water (L/min) |
Mixing (L/min) |
| 1 bar | 4.00 | 4.60 | 3.60 |
| 2 bar | 5.70 | 6.30 | 5.10 |
| 3 bar | 6.80 | 7.90 | 6.20 |
| Flow rate-Max. opening angle (24.5°) | |||
| Water pressure |
Hot water (L/min) |
Cold water (L/min) |
Mixing (L/min) |
| 1 bar | 12.00 | 12.20 | 16.40 |
| 2 bar | 16.20 | 16.40 | 22.20 |
| 3 bar | 20.40 | 20.60 | 27.00 |
